D-Link DWC-2000 - Page 32

30
avail_interfaces
available
interfaces for
packet
capture.
10
util system_check capturePackets stop
Stop the
packet
capture.
11
util system_check capturePackets
download <fileName> <ipAddr>
Download the
packet
capture to the
host machine.
12
util reboot
Reboot the
system.
13
util schedule-reboot <enable_reboot>
Reboot the
system.
14
util usb_test <ipAddr> <fileName>
To test the
USB.
15
util
backup_configuration <fileName> <ipAddr>
Download the
backup
configuration
file to the host
machine.
16
util
restore_configuration <IpAddr> <FileName>
To restore the
configuraton.
17
util
firmware_upgrade <IpAddr> <FileName>
To upgrade
the firmware.
The command “qos ?” at the CLI prompt, gives a description of all the
configuration commands in the branch qos , these are as follows:
1
qos lan
Configure qos
parameters for
lan.
2
qos lan trustmode
Trustmode
configuration in
the controller.
3
qos lan trustmode cos
Configure cos
based QoS on
lan.
4
qos lan trustmode dscp
Configure dscp
based QoS on
lan.
5
qos lan cos-to-dscp-remarking
Enable cos-to-
dscp-remarking.
6
qos lan queue
Queue