D-Link DWM-312W

117D-Link DWM-312W User Manual
Section 4 - Conguration
System Time
System Time
Enable NTP Toggle this to enable NTP synchronization.
Get NTP server
addresses using
DHCP
Toggle this to automatically get NTP server addresses
using DHCP.
Run as a server for
the local network
Toggle this to run as an NTP server for the local network.
System date Displays device’s current system date.
System Time Displays router’s current system time.
Synchronization Indicates whether synchronization has been completed
or not.
NTP Servers
This displays the default public time server. Click on the x to delete.
Click ADD SERVER to add a new public time server.
On this page, you can set the system time and change the time zone.