D-Link DWM-312W - Wps

69D-Link DWM-312W User Manual
Section 4 - Conguration
WPS
WPS 2.4 GHz/5 GHz
Enable WPS Toggle this switch to activate the WPS function.
When the WPS function is enabled, the Information section will become available on the
page.
On the Wi-Fi / WPS page, you can enable the Wi-Fi Protected Setup feature.
Before using the function, you need to congure one of the following authentication
types:
• Open (no encryption)
• WPA2-PSK
• WPA-PSK/WPA2-PSK with the AES encryption method