D-Link DWM-312W

52D-Link DWM-312W User Manual
Section 4 - Conguration
GRE
Tunnel settings
Name Enter the name of the IP tunnel.
IP address Enter the IP address of the virtual interface the tunnel
will use.
Mask Enter the subnet mask to use on the virtual interface.
Interface Select the interface to use to establish the GRE tunnel.
Remote IP Enter the IP address of the remote end of the tunnel.
MTU Specify the Maximum Transmission Unit of the
connection. The default setting is 1400.
Allow traffic
GRE -> LAN
Toggle this to disable trac over the LAN interface.
Static route settings
Remote LAN IP
address
Enter the IP address to use for the local LAN subnet.
Remote LAN mask Enter the IP mask for the remote LAN subnet.
Remote GRE
interface IP
address
Enter the IP address for the remote GRE interface.