D-Link DWM-312W

26D-Link DWM-312W User Manual
Section 4 - Conguration
This menu is used to change the conguration of your connection.
Change Conguration
General Settings
Connection type The connection type of the WAN connection.
Interface The interface of the WAN connection (i.e. WAN Ethernet
port or mobile SIM card).
Connection name The name of the connection.
Enable connection Toggle this to enable or disable the selected
connection.
NAT Toggle this to enable or disable the NAT function of
the router, allowing it to act as a link to your Internet
connection, but without routing functions.
Ping Toggle this switch to enable WAN Ping. This setting is
disabled by default.
RIP Toggle this switch to enable Routing Information
Protocol (RIP). This setting is disabled by default.
ARP Proxy Toggle this switch to enable the Address Resolution
Protocol proxy. This setting is disabled by default.