D-Link DWM-312W - Auto Provision

119D-Link DWM-312W User Manual
Section 4 - Conguration
Auto Provision
Auto Provision
Enable Auto
Provision:
Toggle this to enable Auto Provision. This setting is
disabled by default.
Use BOOTP
option:
Toggle this to use the BOOTP option. This setting is
disabled by default.
Autoconguration
server address:
Enter the address of the autoconguration server.
File name: Enter the name of the conguration le.
File check period: Enter the period (in seconds) at which the router should
check for the le.
Protocol type: Select the protocol to use from the drop-down menu.
Status: The status of the Auto Provision check.