D-Link DWM-312W

74D-Link DWM-312W User Manual
Section 4 - Conguration
Wi-Fi Additional Settings
B/G protection The 802.11b and 802.11g protection function is used to minimize
collisions between devices on your wireless network. Choose from
Auto, Always On, and Always O.
Short GI Guard interval (in nanoseconds). This parameter denes the interval
between transmissions when the router is communicating with
wireless devices. Select Enable to use a 400 ns short guard interval.
Select Disable to use a standard 800 ns guard interval.
Beacon period (in
milliseconds)
Specify the time interval (in milliseconds) between packets sent to
synchronize the wireless network. The default setting is 100 ms.
RTS threshold (in
bytes)
Specify the minimum size (in bites) of a packet for which an RTS frame can
be transmitted. The default size is 2347 bytes and the standard range is
256-2346 bytes.
Frag threshold (in
bytes)
Specify (in bytes) the maximum frame size for a non-fragmented
packet. The default size is 2346.
DTIM period (in
beacon frames)
Specify how often (by the number of beacon frames) that DTIM is
transmitted. By default this is set to 1.
Station Keep Alive
(in seconds)
Specify the time interval (in seconds) between "keep alive" checks of
wireless devices from your WLAN.