D-Link mydlink DNR-202L

38D-Link DNR-202L User Manual
Section 5: Conguration
Live Video
This screen shows the NVR's Live Video feeds. You may select an icon, described in the list below, to operate whichever camera
is selected from the list on the upper right side of the Live Video screen.
Recording Toggle Use this button to start/stop recording. When the
camera is recording, this indicator will change color.
On Screen Display Use this button to congure the various settings for
the On Screen Display (OSD).
Display Single feed Use this button to switch to a single camera feed in
the Live Video display area.
Display 2 x 2 feed
Use this button to switch to a 2 x 2 camera feed in
the Live Video display area.
Full Screen Use this button to switch to a full-screen view of the
Live Video feed.
Glance Toggle Use this button to toggle glance mode. In glance
mode the NVR will cycle briey through each
connected camera.
Control Pad The Control Pad is used to pan, tilt, and zoom (PTZ) a
PTZ camera.
Zoom Control Use the plus and minus buttons to zoom in or out.
Auto/Manual Focus Use this control to choose between automatic and
manual focus control.
Focus Near/Far Use this control to choose between far or near focus.
Preset Path Use this option to toggle the Preset Path function.
Auto-Pan Use this option to toggle auto-panning function.