D-Link mydlink DNR-202L

55D-Link DNR-202L User Manual
Section 5: Conguration
If the NVR is malfunctioning or crashes unexpectedly, click the Restart
button. Restarting the NVR will take about 90 seconds.
Click Restore to reset all congurations to factory default.
Click Save so that all the conguration settings can be saved as a le.
User can restore the conguration from a le after resetting to factory default.
Click the Browse button to select the conguration le and restore it by
clicking the Load button.
When an adminstrator enters any of the Setup pages (except the Live Video
and Playback pages) the NVR will count the idle time where the user is
inactive. After the idle time exceeds a specied period of time, the NVR will
force the user to logout and request login authentication again for security.
Specify the period of idle time here, in minutes.
Click On to enable buzzer, or O to disable. (See "LED and Alarm Overview"
on page 64.)
Click Enable Auto Plugin to enable the device to automatically add veried
cameras found on the network.
System
Restart:
Restore:
Save:
Load
Conguration:
Idle Time:
Buzzer:
Enable Auto
Plugin:
The System settings section allows you to restart the system or reset the device to its factory default settings. Restoring the
unit to factory settings will erase all settings, including any rules that you created.