D-Link mydlink DNR-202L

53D-Link DNR-202L User Manual
Section 5: Conguration
Time and Date Setup
Time Zone:
Enable Daylight Saving:
Auto Daylight Saving:
Set Date and Time Manually:
Oset:
Synchronize with NTP Server:
NTP Server:
Set the Date and Time Manually:
Set Time from My Computer:
Select your Time Zone from the drop-down menu.
Check this box to Enable Daylight Saving time.
Select this option and the clock is adjusted automatically
according to daylight saving of the selected time zone.
Select this option to congure the daylight saving date
and time manually.
Sets the amount of time to be added or removed when
daylight saving time is enabled.
Check the box to enable the camera to synchronize time
settings with an NTP (Network Time Protocol) server.
Select the NTP Server that is closest to your location.
This option allows you to Set date and time manually.
This will synchronize the date and time information from
your PC.