D16 Group Drumazon - Trigger output

37
Youmaysetadefaultaudiooutputcongurationusingcomboboxesunderinstruments’abbreviationsbychoosingone
of twelve available audio outputs for every instrument.
OrmaptheoutputusingtheGUIaccordinglytoyourpreferencesandthenuseSet from current assignations option.
Then your map becomes the default one.
The content of the Default outputs assignsgroupissavedintheDrumazoncongurationleandappliestoallnew
instancesoftheplug-in.Whenremovinganyinstanceoftheplug-infromthehostapplicationthecongurationle
is saved.
Default outputs type
This is responsible for choosing the type of outputs.
We’re allowed to choose one of the two available types: Stereo or Mono.
ThecontentofthegroupissavedintheDrumazoncongurationleandappliestoallnewinstancesoftheplug-in.
Whenremovinganyinstanceoftheplug-infromthehostapplicationthecongurationleissaved.
Default output assigns – selecting outputs
Default outputs type
 Note: The plug-in
in the AU version
allows only Stereo
outputs
Conguration • Outputs tab
7