D16 Group Drumazon - Unlinking and midi link management

48
2. In the status bar in the bottom section of GUI a message should appear “waiting for a controller or parameter
movement…”:
  Inthismodetheplug-inwaitsforanychangeintheparametervalue(movementofanycontrolonGUI)andfor
themovementofanyMIDICCcontrolfromtheexternalMIDIcontroller,whichoperatesonanactiveMIDIinput
channel directed to Drumazon. The order of these actions is irrelevant.
During the above-mentioned actions, the status bar informs about the currently changing values of controls
and provides their names.
  WhenaMIDIcontrol<–>GUIcontrollinkisestablished,alineisaddedtotheMIDICClinklist:
  Whenalinkisestablishedforacontroller,itispossibletorepeattheoperationforthenextMIDICC
and parameter pairs. Subsequent links will be created and added to the list.
Status bar
MIDI CC link list and function buttons
Conguration • Midi control tab
7