Daedong KIOTI DK40SE - REMOVAL AND INSTALLATION OF 3-POINT HITCH IMPLEMENT

6 -7
3-POINT HITCH IMPLEMENT OPERATION
6
(1) Telescopic Stabilizers Pin
H11O567A
3. Remove both of the Telescopic Sta-
bilizers fixing pins.
IMPORTANT
When removing/installing an
implement, remove the check
link pin to use the lower link end
(cassette type) effectively.
(1) Latch (2) Lower Link End
H11O564A
4. Press the latch to pull out the lower
link end (cassette type).
H11O566A
5. Install the lower link to the imple-
ment and fit the pins.
(1) Lower Link