1. To turn on, position the switch
marked (wiper) to the “ON” posi-
tion.
2. T he washer f lui d is spraye d
through the nozzle of the wiper by
pressing the switch again with the
key switch in the “ACC” or “ON”
position.
Normal water can be used as
the washer uid, but it is rec-
ommended to use the washer
fluid made exclusively for ve-
hicles. Especially, make sure
to use seasonal washer uid in
winter.
The washer uid motor can be
damaged if you are trying to
spray the washer fluid when
its tank is empty.
Therefore,
make sure to check the fluid
level before driving.
Spray enough washer uid and
operate the wiper if there is
dirt on the window.
When op-
erating the wiper while it is fro-
zen to the window, its fuse can
be blown.
In this case, operate
the wiper after increasing the
cabin temperature enough to
defrost the wiper.
3. The washer fluid for the wind-
shield is installed on the rear left
side outside the cabin.
(1) Washer uid tank
H11O4F2A
IMPORTANT