Daedong KIOTI EX45 - Main Shift Lever; Range Gear Shift Lever

4
-
31
4
-
30
DESCRIPTION OF OPERATING SYSTEMEX35(C)/EX40(C)/EX45(C)/EX50(C)
4
-
31
4
-
30
DESCRIPTION OF OPERATING SYSTEMEX35(C)/EX40(C)/EX45(C)/EX50(C)
H11O454A H11O455A
Four speeds can be selected by
moving this main shift lever in “H”
shaped path. You can shift into this
lever from the 1st to 4th gears even
when the tractor body is moving by
disengaging the clutch during driving
as these gears are synchromeshed.
In total, 24 forward driving speeds
and 24 reverse driving speeds are
provided by combination of the main
shift lever (4 speeds), range shift le-
ver (3 speeds), shuttle shift lever,
and creep speed lever.
(1) Main Shift Lever
H11O456A
High, mid and low speeds can be se-
lected by the range shift lever.
Follow the instruction below if a prob-
lem occurs during shifting this lever:
1. Put the range shift lever into the
neutral position.
2. Depress the pedal slightly to pre-
vent the gears in the transmission
from rotating.
3. Shift the range shift lever into the
desired position with the brake
pedal and front/rear driving pedals
depressed. (HST type)
(1) Range Gear Shift lever
( ) High Speed ( ) Mid Speed
( ) Low Speed (N) Neutral
(1) Range Shift Lever
( ) High Speed ( ) Mid Speed
( ) Low Speed (N) Neutral
High, mid and low speeds can be se-
lected by the range shift lever. Make
sure to shift the range shift lever af-
ter the tractor is completely stopped
by depressing the clutch pedal.
If the lever is not moved freely or
makes abnormal noise, put the lever
into the neutral position, engage and
disengage the clutch, and then try to
shift the lever.
MAIN SHIFT LEVER RANGE GEAR SHIFT LEVER
MANUAL Type MANUAL Type HST Type
M47-EU-04.indd 30 2012-04-06 오후 3:31:04