Daedong KIOTI EX45 - Precautions When Using POWER Steering

5
-
21
5
-
20
OPERATIONEX35(C)/EX40(C)/EX45(C)/EX50(C)
5
5
-
21
5
-
20
OPERATIONEX35(C)/EX40(C)/EX45(C)/EX50(C)
(1) Power Steering Handle
PRECAUTIONS WHEN USING
POWER STEERING
H11O523a
1. The power steering function is
activated only while the engine
is running. However, the steer-
ing wheel becomes slightly heavi-
er when the engine is running at a
low speed.
The steering wheel can be operat-
ed but becomes very heavy while
the engine is stopped.
2. If you operate the steering wheel,
with the tractor halted, using the
implement equipped in front of the
loader and the like, the steering
wheel operation can be getting a
little heavy. Operate the steering
wheel moving the tractor in this
case.
3. When a loader is mounted, adjust
the air pressureof the front wheel
to its maximum specification and
mount weight or implement on the
3 point hitch of the tractor, and re-
move the front weight to make the
front and rear balance more stable
for safe working.
4. When turning the steering wheel
to one side, the operating sound
of the safety valve (relief valve)
is heard. Do not operate the trac-
tor keep the valve sound is heard
continually (OK for a short period
of time). The temperature of the
hydraulic fluid may rise, causing
malfunction.

The non-load reaction type
means that the reaction force or
impact applied to the front axle
is not transferred to the steering
wheel. Therefore, this function
prevents the steering wheel from
returning to its original position
by the resistance applied to the
front wheels when turning.

These characteristics are suit-
able for tractors which are driv-
en mostly at a low speed. The
features low reaction force of the
steering wheel can reduce the
operator’s fatigue during work
in which frequent turning is re-
quired. However, it may be in-
convenient when driving at a
high speed as the steering wheel
is not automatically returned to
its straight-ahead position after
turning.
NOTE
M47-EU-05.indd 21 2012-03-14 오후 7:17:47