To avoid accidents:
Make sure to set the ROPS up-
right and fasten the seat belt
during work.
If it is necessary to work with
it folded, do not fasten the seat
belt.
It can be dangerous in case of
tractor rollover.
TO RAISE THE ROPS TO
UPRIGHT POSITION
1. Remove both the grip bolt, clip pin
and set pin.
2. Raise ROPS to the upright posi-
tion.
T46O515a
CAUTION
3. Align pin holes, insert set pin and
secure them with the clip pin.
4. Fix the ROPS with the grip bolt.
(1) Grip Bolt (2) Set Pin
(3) Clip Pin
T46O516a