71
9 GETTING DATA FROM ANOTHER MACHINE
It is possible to collect data from other Dage machines.
It is possible to enable this feature for a free 30-day trial. See your line engineer.
9.1 SELECTING A REMOTE MACHINE
The second machine will have been connected to the Series 4000, 4000HS or 5000, and a test group
configured by your engineer to expect test results from it.
Note: The selections made in the ‘New Sample’ screen are made in the same way as any test. It is the
test group selected that will instruct the machine to accept data from the second machine.
Remote machine type shown here
To Next Page
Loading...