Dage 4000HS - 1 Types of Machine 4000, 4000 Hs and 4000 Hs-Z

6
1 TYPES OF MACHINE 4000, 4000HS AND 4000HS-Z
This manual covers the 4000HS and 4000HS-Z
The operation of this machine is very similar to the 4000. Most machine options may be
used on either machine. The 4000 is a general-purpose machine that can test 100kg die
shear and fine pitch wire bonds. The 4000HS is designed for high-speed applications. The
4000HS is capable of testing up to 4M/s in shear and 1.3M/s in pull. The 4000HS-Z is a
zone shear machine capable of testing, in shear, up to 80Kg at speeds up to 600mm/s and
can also be used to perform pull tests up to 1.3M/s in the same way as a 4000HS.