8
3 LOCATING THE MACHINE
3.1 UNPACKING THE MACHINE AND THE WORK STATION
THE DAGE SERIES 4000HS WEIGHS
APPROXIMATELY 100KG LIFT WITH
CAUTION USING THE LIFTING POINT.
1) Move the crated machine to the unpacking area using a suitably-rated
fork lift truck:
TIPPING HAZARD
Higher than normal Centre of Gravity
Do not tip the machine more than 10° as it only has three feet
and so will tip easily
May cause death or serious injury by crushing
CRUSHING HAZARD
The Machine is extremely heavy
Ensure adequate help is available when positioning the
machine, as it may be difficult to control any lifting
equipment even on a gently sloping floor
May cause death or serious injury by crushing
To Next Page
Loading...