Parameter Description
OSD
Select the OSD check box, and the numbers of motor vehicles,
non-motor vehicles and people in the detection area are
displayed.
Click Reset to recount.
Pixel Counter
Click Draw Target next to Pixel Counter, and then press and
hold the left mouse button to draw a rectangle, the Pixel
Counter then displays its pixel.
Privacy Protection
Select the Privacy Protection check box and then select Face
or Human body from the drop-down list to blur faces or human
bodies in the image.
Face Enhancement
Select the Face Enhancement check box to preferably
guarantee clear face with low stream.
Snap Face Image
Set a range for snapping face image, including face picture and
one-inch picture.
Enable Face Exposure
Select the Enable Face Exposure check box to make face
clearer by adjusting lens aperture and shutter.
Face Target Brightness Set the face target brightness, and it is 50 by default.
Face Exposure Detection
Interval
Set the face exposure detection interval to prevent image
ickering caused by constant adjustment of face exposure. It is
5 seconds by default.
Scene Set scene as Distant View or Close View.
Step 6 Set arming periods and alarm linkage actions. For details, see "5.1.1 Alarm Linkage".
Step 7 Click Save.
Results
Click on the live page to view the detection results of video metadata.
●
The plate no. and attributes of motor vehicle are displayed at the right side, and pictures of
people and non-motor vehicles and their attributes at the bottom.
●
Click the picture in the display area, and the detailed information is displayed.
Operation Manual
216
To Next Page
Loading...
Need help?
General
