Figure 5-88 Scene set (video metadata)
Step 2 Click , and double-click the name to modify the rule name, and select People in Rule
Type list.
Step 3 Click Draw to draw a detect region and an exclude region in the image.
Step 4 Click Draw Target next to Target Filter to draw the maximum size and minimum size for
the detection target in the image.
Step 5 Set parameters.
Table 5-24 Description of scene set parameters (video metadata)
Parameter
Description
People Flow Statistics
Select the People Flow Statistics check box to count the
number of people in the detection area.
Trac Flow Stat
Select the Trac Flow Statistics check box to count the
number of motor vehicles in the detection area.
Capture whole vehicle
Select the Capture Whole Vehicle check box to capture whole
vehicle. The snapshot is saved in the preset path for monitoring
snapshots. For details, see "4.5.2.5 Path".
Non-motor Vehicle Flow
Statistics
Select the Non-motor Vehicle Flow Statistics check box to
count the number of non-motor vehicles in the detection area.
Operation Manual
215
To Next Page
Loading...
Need help?
General
