Figure 4-60
WI-FI working status: Here you can view current connection status.
Please note:
After successful connection, you can see WI-FI connection icon at the top right corner of the
preview interface.
When the hotspot verification type is WEP, system displays as AUTO since the device cannot
detect its encryption type.
System does not support verification type WPA and WPA2. The display may become
abnormal for the verification type and encryption type.
After device successfully connected to the WI-FI, you can view the hotspot name, IP address,
subnet mask, default gateway and etc.
Static
In Figure 4-60, select working mode as Static, enter static setting interface. See Figure 4-61.
To Next Page
Loading...
