Dahua Mobile DVR Series - Page 87

76
Step 2 Set parameters.
 Transparency: It is to adjust transparency. The lower the value is, the transparent the image
is.
 Channel name: Here is for you to modify channel name. See Figure 4-77
 Time display: You can select to display time or not when system is playback.
 Channel display: You can select to channel name or not when system is playback.
 GPS display: System displays GPS information in the screen for your reference. Please note
only the unit of GPS module supports this function.
 Screen calibration: it is for touch screen only.
 Resolution: It is to set resolution.
 Image enhance: It is to optimize video margin.
 Tour: Click Setup button, enter tour interface. See Figure 4-78.
 Motion tour type: System supports 1/8 window tour.
 Alarm tour type: System supports 1/8 window tour.
 Video mirror: Click Setup button, enter video mirror interface. See Figure 4-79. Set the
vertical or horizontal mirror.
 Split mode: Set split mode.
 Volume control: Live/talk. It is to set volume during live or the bidirectional talk.
Figure 4-77