4
Never come close to the unit while in transport with a hoisting attachment.
Follow standards to conduct wiring work.
If refrigerant leaks, provide thorough ventilation.
Do not put fingers or foreign matters in a clearance between equipment.
Fasten the unit during operation.
Immediately stop the unit when a malfunction occurs.
Use commercial power supply.
Do not use the unit in the special atmosphere.
Check the main machine for safety conditions prior to test run.
Check the unit before operation.
CAUTION
Do not ride the unit.
WARNING
Conduct electric wiring in
accordance with respective
national and regional standards.
Improper wiring may result in
burnout or fire.
If refrigerant leakage occurs while in
work, be sure to ventilate the workpiece.
If a large quantity of refrigerant
penetrates the workpiece, anesthetic
effect or asphyxiation can result.
Guards or causing is provided with
rotary parts for safety. Do not put
fingers or foreign matters in the
clearance. Doing so can result in injury.
When a malfunction occurs, unless
causes of the malfunction are
definitely eliminated, do not run the
unit. Doing so can result in damage,
an electric shock, a fire, or injury.
Do not sit on or ride the equipment. Doing so may
cause a drop from or a fall on the equipment, thus
resulting in injury. Or, it may lead to damages to
the unit causing an electric shock in the case of a
contact to the charge section.
Be sure to use commercial power
supply. Using the inverter power
supply or else will result in burnout.
Never come close to the unit while in
transport with the hoisting attachment. If
not heeded, the unit can drop or tumble,
thus resulting in injury or damage.
Check to be sure the securing position
referring to the outline drawing and then
firmly secure the unit with bolts or foundation
bolts. If the unit is installed in an overhead
location, the unit can drop or tumble.
Do not use the unit in the special atmosphere,
such as that with dusts, oil mist, corrosive
gasses (H
2
S, SO
2
, NO
2
, CL
2
, etc.) or at high
temperature or humidity.
Prior to the test run, check to be sure the main machine
is in a safe state (i.e., the main machine does not
operate, or even though the unit operates, no accidents
occur.) Not doing so may result in injury or damage.
Before start of operation, make sure
that the oil piping and electric wiring are
properly conducted, and connecting
parts are securely tightened.
MUST MUST
MUST
MUST
PROHIBIT
PROHIBIT
CAUTION
MUST
CHECK
PROHIBIT
Secure the unit so that it will not move due to
vibrations or external force caused during
transport. Excessive vibrations or external force
may result in damage to the internal equipment.
MUST
Be sure to secure the unit for transport.
MUST
00_PB00540A_M10.indb 4 2023/08/09 12:58:50
To Next Page
Loading...
