Daikin R407C PLUS - Page 119

Test Operation Si33-105
108 Test Operation R407C PLUS Series Heat Recovery System
Note: Resetting of power supply switch is necessary after capacity setting.
1 Transmission terminal
Indoor unit, Cool/Heat
selector Outdoor - Outdoor
2 Service monitor LED
(Green)
3 Function setting mode
switch and LED
LED
4 Function of setting
between cooling and
heating
5 Outdoor unit
Capacity setting switch
Switches for capacity setting when the outdoor unit PC board is
replaced to spare parts PC board.
Refer table below.
HAP
LED-A
SERV. MON.
(V0836)
C/H SELECT
IN/D
OUT/D
SS1
(V0838)
SS2
BDFH
SS3 SS4 SS5
ACEG
(V0848)
SS2 SS3 SS4 SS5
ABCDEFGH
RSEYP16KJ !!! !
RSEYP18KJ !! ! !
RSEYP20KJ !! ! !
RSEYP24KJ !! ! !
RSEYP26KJ !! ! !
RSEYP28KJ !!!!
RSEYP30KJ !!!!
Capacity setting table