Daikin R407C PLUS - Contents of Control Modes

Test Operation Si33-105
134 Test Operation R407C PLUS Series Heat Recovery System
1.14 Contents of Control Modes
Twenty modes consisting of combinations of the following five operation modes with
temperature and operation mode setting by remote controller can be set and displayed by
operation modes 0 through 19.
&
ON/OFF control impossible by remote controller
Used when you want to turn on/off by central remote controller only.
(Cannot be turned on/off by remote controller.)
&
OFF control only possible by remote controller
Used when you want to turn on by central remote controller only, and off by remote controller
only.
&
Centralized
Used when you want to turn on by central remote controller only, and turn on/off freely by
remote controller during set time.
&
Individual
Used when you want to turn on/off by both central remote controller and remote controller.
&
Timer operation possible by remote controller
Used when you want to turn on/off by remote controller during set time and you do not want
to start operation by central remote controller when time of system start is programmed.
How to Select
Operation Mode
Whether operation by remote controller will be possible or not for turning on/off, controlling
temperature or setting operation mode is selected and decided by the operation mode given on
the right edge of the table below.
ON by remote
controller
(Unified ON by
central remote
controller)
OFF by remote
controller
(Unified OFF by
central remote
controller)
Temperature
control by
remote controller
Operation mode
setting by
remote controller
OFF by
remote
controller
Control
mode is "1."
Example
↓
Rejection
↓
Rejection
↓
Rejection
↓
Acceptance
↓
Acceptance
(VL069)