14
HOME LEAVE Operation
To start HOME LEAVE operation
To cancel HOME LEAVE operation
Before using HOME LEAVE operation.
1, 2
Initial setting Selectable range
Cooling
Heating
HOME LEAVE operation is a function which allows you to
record your preferred temperature and air flow rate settings.
1. Press “HOME LEAVE button”.
• “ ” is displayed on the LCD.
• The HOME LEAVE lamp lights up.
2. Press “HOME LEAVE button” again.
• “ ” disappears from the LCD.
• The HOME LEAVE lamp goes off.
To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow
rate for HOME LEAVE operation. Record your preferred temperature and air flow rate.
Air flow rate
5 step, “ ” and
“”
5 step, “ ” and
“”
64-90°F(18-32°C)
50-86°F(10-30°C)
Air flow rate
“ ”
“ ”
Temperature
77°F
77°F
1. Press “HOME LEAVE button”. Make sure “ ” is displayed in the remote
controller display.
2. Adjust the set temperature with “ ” or “ ” as you like.
3. Adjust the air flow rate with “FAN” setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change
the recorded information, repeat steps 1 – 3.
Temperature
To Next Page
Loading...
Need help?
General
