SiUS12-928_B FDXS-D Series
Operation Manual 118
4.6 TIMER Operation
16
TIMER Operation
To use OFF TIMER operation
1. Press “OFF TIMER button”.
is displayed.
blinks.
NOTE
4
2
1, 3
Timer functions are useful for automatically switching the air
conditioner on or off at night or in the morning.
You can also use OFF TIMER and ON TIMER in combination.
• Check that the clock is correct.
If not, set the clock to the present time.
2. Press “TIMER Setting button” until the time
setting reaches the point you like.
• Every pressing of either button increases or decreases
the time setting by 10 minutes. Holding down either
button changes the setting rapidly.
3. Press “OFF TIMER button” again.
• The TIMER lamp lights up.
To cancel the OFF TIMER operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
• When TIMER is set, the present time is not displayed.
• Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is canceled
when remote controller batteries are replaced.)
• When operating the unit via the ON/OFF Timer, the actual length of operation may vary from the
time entered by the user. (Maximum approx. 10 minutes)
To Next Page
Loading...
Need help?
General
