SiUS12-928_B CTXS-J, CTXS-H, FTXS-H Series
Operation Manual 74
2.2 AUTO · DRY · COOL · HEAT · FAN Operation
AUTO
·
DRY
·
COOL
·
HEAT
·
FAN Operation
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation mode.
• Each pressing of the button advances the mode setting in sequence.
To start operation
1.
Press and select a operation mode.
2.
Press .
AUTO
DRY
COOL
HEAT
FAN
• “ ” is displayed on the LCD.
• The OPERATION lamp lights up.
Display
To stop operation
Press again.
Press or .
• “ ” is no longer displayed on the LCD.
• The OPERATION lamp goes off.
To change the temperature setting
• The displayed items on the LCD will change whenever either one of the buttons is pressed.
DRY or FAN operation
COOL operation
HEAT operation
AUTO operation
The temperature setting is not
variable.
64-90˚F
(18-32˚C)
50-86˚F
(10-30˚C)
64-86˚F
(18-30˚C)
Press to raise the temperature and press to lower the
temperature.
10
To Next Page
Loading...
Need help?
General
