“INTELLIGENT EYE” is useful for energy saving
Energy saving operation
Notes on INTELLIGENT EYE operation
• Change the temperature –3.6°F (–2°C) in HEAT / +3.6°F (+2°C) in COOL / +1.8°F (+1°C) in DRY operation from set temperature.
• Decrease the airflow rate slightly in FAN operation only.
• If no presence detected in the room for 20 minutes.
• Sensor may not detect moving objects further than 23ft. (7m) away. (Check the application range.)
• Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtains and light reflected off of mirrors as passersby.
• INTELLIGENT EYE operation will not go on during POWERFUL operation.
• NIGHT SET mode will not go on during use of INTELLIGENT EYE operation.
• Do not place large objects near the sensor.
Also keep heating units or humidifiers outside the sensor’s detection area. This sensor can detect undesirable objects.
• Do not hit or forcefully push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
• Application range is as follows.
Vertical angle 90°
(Side view)
Horizontal angle 110°
(Top view)
NOTE
90°
55° 55°
23ft. (7m)
23ft.
(7m)
Page 20
CAUTION
15
To Next Page
Loading...
Need help?
General
