Danfoss AK-SM 850 - Remote Management Tool (RMT)

The Remote Management Tool (RMT) is a PC software application
tool that is designed to support the AK-SM, both in commission-
ing and service. The RMT is a powerful tool that allows full oine
programming and simulation of AK-SM databases, providing the
opportunity to save considerable on site commissioning times.
In addition, the RMT tool has various remote management
features, facilitating complete system management. Creating
custom images for the AK-SM web browser is also another
function of the RMT tool. The following features can be seen in
the RMT;
• Oine web Programming
Launch oine web simulator(s) to allow full oine AK-SM
database programming, with controller simulation you can
fully pre-program your application and save the resulting
database to USB for on site install.
• Program simulation
From within the web browser session simulate board and
point variables to test calculations and system behaviour
• Custom Graphics
Use your own Jpeg or bitmp le to crate custom images,
mapped with any congured system datapoint
• F TP (File Transfer Protocol)
Remotely connect, load and access system les (html web &
EDF device les) Retrieve datapoints
• Address Book
Save your most commonly connected site details to allow
for one click connection
• Tools
Download System software, backup (save) & load database
les.
• Language
Compatible in multi- languages
The RMT tool is available from your Danfoss sales oce with
associated supporting documentation.
Remote Management Tool (RMT)
AK-SM 850 User Guide Lit. no. USCO.PI.R1.E1.02 © Danfoss 07-2013 11