Danfoss AK-SM 850 - Initial Configuration; Language Setup

The following section describes the recommended actions
to get your AK-SM up and running.
Local keypad - button layout
Initial Conguration - language
Home
(System View)
Menu
Alarms Conguration
Numeric keypad
Menu Navigation
Escape
Page Up
Page Down
Previous
Next
Back Shift
Select language
Display language
Setting language for local SM display
Your AK-SM can display several dierent languages. The
factory default the unit will display English, in addition your
required language can also be enabled. Follow the simple
steps below to display your preferred language in the local
screen;
1/ Press the Conguration button, and if required enter the
factory default user name and password (Supervisor, 12345)
2/ Using the arrow keys, navigate to the ‘System’ memu.
3/ Using the down arrow, navigate to the Language line and
select your required language
4/ Select your language for ‘Display’. The unit will then request
a reset.
AK-SM 850 User Guide Lit. no. USCO.PI.R1.E1.02 © Danfoss 07-2013 13