Danfoss FC 300 Instruction Manual

FC 300 Instruction Manual
Warnings and Alarms
This is possible, for instance, in parameters 1-90 Motor Thermal Protection. After an alarm/trip,
the m otor will remain coasted, and alarm and warning will flash on the FC 300. Once the
problem has been rectified, only the alarm continues flashing.
60
MG.33.A6.22 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Enclosure	IP20
Approvals	cUL, UL, CE
EMC filter	Built-in
Communication Options	CANopen, PROFIBUS DP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Output Voltage	0-100% of supply voltage