Danfoss FC 300

34-70 MCO Alarm
Word 1
34-71 MCO Alarm
Word 2
Select which variables are to be logged.
15-11 Logging Interval
Range: Function:
1ms
*
[1 - 86400000 ms] Enter the interval in milliseconds between each sampling of the
variables to be logged.
15-12 Trigger Event
Option: Function:
[0]
*
False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains voltage out of
range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[33] Digital input DI18
[34] Digital input DI19
2. How to Programme FC 300 Programming Guide
184 MG.33.M2.02 - VLT
®
is a registered Danfoss trademark
2