Danfoss FC 300

[32] Set digital output A
low
Set digital output A low [32] - any output with SL output A will
be low.
[33] Set digital output B
low
Set digital output B low [33] - any output with SL output B will
be low.
[34] Set digital output C
low
Set digital output C low [34] - any output with SL output Cwill
be low.
[35] Set digital output D
low
Set digital output D low [35] - any output with SL output Dwill
be low.
[36] Set digital output E
low
Set digital output E low [36] - any output with SL output E will
be low.
[37] Set digital output F
low
Set digital output F low [37] - any output with SL output F will
be low.
[38] Set digital output A
high
Set digital output A high [38] - any output with SL output A will
be high.
[39] Set digital output B
high
Set digital output B high [39] - any output with SL output B will
be high.
[40] Set digital output C
high
Set digital output C high [40] - any output with SL output C will
be high.
[41] Set digital output D
high
Set digital output D high [41] - any output with SL output D will
be high.
[42] Set digital output E
high
Set digital output E high [42] - any output with SL output E will
be high.
[43] Set digital output F
high
Set digital output F high [43] - any output with SL output Fwill
be high.
[60] Reset Counter A
Reset Counter A [60] - resets Counter A to zero.
[61] Reset Counter B
Reset Counter B [61] - resets Counter B to zero.
[70] Start Timer 3
Start Timer 3 [70] - Start Timer 3, see par. 13-20 for further
description.
[71] Start Timer 4
Start Timer 4 [71] - Start Timer 4, see par. 13-20 for further
description.
[72] Start Timer 5
Start Timer 5 [72] - Start Timer 5, see par. 13-20 for further
description.
[73] Start Timer 6
Start Timer 6 [73] - Start Timer 6, see par. 13-20 for further
description.
[74] Start Timer 7
Start Timer 7 [74] - Start Timer 7, see par. 13-20 for further
description.
2.15. Parameters: Special Functions
2.15.1. 14-** Special Functions
Parameter group for configuring special frequency converter functions.
FC 300 Programming Guide 2. How to Programme
MG.33.M2.02 - VLT
®
is a registered Danfoss trademark 171
2