14-74 VLT Ext. Status Word
Range: Function:
0
*
[0 - 4294967295] Read out the ext. status word corresponding to VLT 3000 or VLT
5000
2.16. Parameters: Drive Information
2.16.1. 15-** Drive Information
Parameter group containing frequency converter information such as operating data, hardware
configuration and software versions.
2.16.2. 15-0* Operating Data
Parameter group containing operating data e.g. Operating Hours, kWh counters, Power Ups, etc.
15-00 Operating Hours
Range: Function:
0h
*
[0 - 2147483647 h] View how many hours the frequency converter has run. The
value is saved when the frequency converter is turned off.
15-01 Running Hours
Range: Function:
0h
*
[0 - 2147483647 h] View how many hours the motor has run. Reset the counter in
par. 15-07. The value is saved when the frequency converter is
turned off.
15-02 kWh Counter
Range: Function:
0kWh
*
[0 - 2147483647
kWh]
Registering the power consumption of the motor as a mean val-
ue over one hour. Reset the counter in par. 15-06.
15-03 Power Up's
Range: Function:
0
*
[0 - 2147483647] View the number of times the frequency converter has been
powered up.
15-04 Over Temp's
Range: Function:
0
*
[0 - 65535] View the number of frequency converter temperature faults
which have occurred.
FC 300 Programming Guide 2. How to Programme
MG.33.M2.02 - VLT
®
is a registered Danfoss trademark
181
2
To Next Page
Loading...
