Danfoss FC 301 Operating Guide

1.5 Type Approvals and Certications
The following list is a selection of possible type approvals
and certications for Danfoss frequency converters:
089
NOTICE
The specic approvals and certication for the frequency
converter are on the nameplate of the frequency
converter. For more information, contact the local
Danfoss oce or partner.
For more information on UL 508C thermal memory
retention requirements, refer to the section Motor Thermal
Protection in the product-specic design guide.
For more information on compliance with the European
Agreement concerning International Carriage of Dangerous
Goods by Inland Waterways (ADN), refer to the section
ADN-compliant Installation in the product-specic design
guide.
Introduction Operating Guide
MG33AT02 Danfoss A/S © 05/2018 All rights reserved. 5
1 1

Danfoss FC 301 Specifications

General

Type	AC Drive
Output frequency	0-1000 Hz
Enclosure rating	IP20, IP21, IP55
Control method	Sensorless vector control
Communication options	RS-485, CANopen, Profibus DP
Ambient temperature	-10°C to +50°C
Supply voltage	200-240 V, 380-500 V, 525-690 V
Protection class	IP20, IP21, IP55
Cooling method	Forced air
Relative humidity	5% to 95% (non-condensing)
Storage temperature range	-25 to 70 °C (-13 to 158 °F)