Danfoss PLUS+1 Series User Manual

Product Installation.......................................................................................................................................................................28
Mounting.....................................................................................................................................................................................
28
Machine Diagnostic Connector...........................................................................................................................................29
Grounding...................................................................................................................................................................................29
Hot Plugging.............................................................................................................................................................................. 29
Recommended Machine Wiring Guidelines...................................................................................................................29
Recommended Machine Equipped with PLUS+1 Module Welding Procedures ............................................. 29
PLUS+1 USB/CAN Gateway...................................................................................................................................................30
Technical Information PLUS+1® Controller Family
Contents
4 520L0719 • Rev PB • Feb 2014

Danfoss PLUS+1 Series Specifications

General

Temperature Range	-40°C to +85°C
Ingress Protection	IP67
Communication Interfaces	CAN, Ethernet, USB, RS232, RS485
Operating System	PLUS+1 GUIDE
Programming Language	PLUS+1 GUIDE (Graphical User Integrated Development Environment)
Memory	Flash, RAM
Inputs	Analog, Digital
Outputs	PWM, High-Side
Protection	Overvoltage, Undervoltage, Reverse Polarity, Short Circuit
Operating Voltage	8-32 VDC