Item Quantity Description
Grounding clamp for cable shield, size M25 3 Clamping the power cables
Grounding clamp for grounding conductor 2 Power cable grounding
"Product modified" label 1 Data about changes
IP21: Cable grommet 3 Sealing for the cables
IP54: Cable grommet 3 Sealing for the cables
4.2.5 Accessories Bag, MR8
Table 8: The Content of the Accessories Bag
Item Quantity Description
M4x16 screw 3 Screws for the grounding clamps for control cable
Grounding clamp for control cable 3 Control cable grounding
Grounding clamp for cable shield KP40 3 Clamping the power cables
Cable insulator 11 To prevent contact between cables
Cable grommet, hole diameter 25.3 mm 4 Sealing for the cables
Bushing rubber 4 Sealing for the control cables
M8 hexagon nut 15 For cable installation
Conical spring washer 11 For cable installation
Split spring washer 4 For grounding clamp installation
M4x10 pan head screw 2 For touch cover installation (IP00)
Grounding clamp for grounding conductor 2 Clamping the grounding conductor of the power cables
Product modified label 1 Data about changes
4.2.6 Accessories Bag, MR9
Table 9: The Content of the Accessories Bag
Item Quantity Description
M4x16 screw 3 Screws for the grounding clamps for control cable
Grounding clamp for control cable 3 Control cable grounding
Cable insulator 10 To prevent contact between cables
Cable grommet, hole diameter 25.3 mm 4 Sealing for the cables
Bushing rubber 4 Sealing for the control cables
M4x8 screw 2 For installation
M8 hexagon nut 6 For installation
Split spring washer 4 For grounding clamp installation
Receiving the Delivery
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711| 21
Danfoss A/S © 2019.05
To Next Page
Loading...
