Danfoss VACON 100 industrial - Installing the AC Drive in an IT System, MR8

6.6.3 Installing the AC drive in an IT System, MR8
Context:
Use these instructions to change the EMC protection of the AC drive to level C4.
Prerequisites:
Open the cover of the AC drive and remove the cable cover as instructed in
6.4.2 Get Access and Locate the Terminals for MR8.
Electrical Installation
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711
58 | Danfoss A/S © 2019.05