Item Quantity Description
M10 hexagon nut 9 For cable installation
Conical spring washer 9 For cable installation
Grounding clamp for grounding conductor 2 Grounding cover
Product modified label 1 Data about changes
4.3 Storing the Product
Context:
If you need to store the product before installing it, follow these instructions.
Procedure
1. Make sure that the ambient conditions agree to these:
Temperature: -40...+70 °C (-40...+158°F)
Humidity: 0...95%, no condensation
2. If you keep the package in storage for more than 2 months, keep it in controlled conditions.
A Make sure that the temperature variation is small.
B Make sure that the humidity is less than 50%.
4.4 Lifting the Enclosure Sizes MR8 and MR9
Context:
The weights of AC drives of different enclosure sizes are different. It can be necessary for you to use a lifting device to move the drive
from its package. See the weights of the different enclosure sizes in table 23.
WARNING
LIFTING HEAVY LOAD
Not following the safe lifting instructions can result in death or serious injury.
-
Do not walk under suspended loads. Use lifting devices that are appropriate for the weight of the unit. Use the
recommended lifting method.
Receiving the Delivery
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711
22 | Danfoss A/S © 2019.05
To Next Page
Loading...
