Danfoss VACON 100 industrial - Get Access and Locate the Terminals for MR9

M5
M4x8
A
e30bh253.10
A The wing nut
Illustration 11: Removing the EMC Shield Plate, MR8
5. Find the motor terminals. The location of the terminals is different than usually, especially in MR8.
L1
U V W
L2 L3 DC-
DC+
R+
R-
e30bh254.10
6.4.3 Get Access and Locate the Terminals for MR9
Context:
Follow these instructions to open the AC drive for installing the cables, for example.
Electrical Installation
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711
40 | Danfoss A/S © 2019.05