Procedure
1. Remove the drive from the pallet where it was bolted to.
2. Use a lifting device that is sufficiently strong for the weight of the drive.
3. Put the lifting hooks symmetrically in a minimum of 2 holes.
A The maximum lifting angle is 45 °.
Illustration 2: Maximum Lifting Angle
4.5 Using the Product Modified Label
Context:
In the accessories bag, there is also a "product modified" label. The function of the label is to tell the service personnel about the
changes that are made in the AC drive.
Receiving the Delivery
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711| 23
Danfoss A/S © 2019.05
To Next Page
Loading...
