Danfoss VACON 100 industrial - Using Fieldbus through an Ethernet Cable

7.4.4.3 Using Fieldbus through an Ethernet Cable
Prerequisites:
Open the covers according to instructions in 6.4.1 Get Access and Locate the Terminals for MR4-MR7, 6.4.2 Get Access and Locate the
Terminals for MR8, or 6.4.3 Get Access and Locate the Terminals for MR9.
Control Unit
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711| 75
Danfoss A/S © 2019.05