A The height of the opening
C The height of the drive
E The distance between the bottom of the drive and the
bottom of the opening
G The outline of the drive
B The width of the opening
D The width of the drive
F The outline of the opening
H The top of the drive
Illustration 5: Dimensions of the Opening and Drive Outline with Flange
Table 10: The Dimensions of the Drive, MR4 to MR7, in mm (in inch)
Enclosure size C D
MR4 357 (14.1) 152 (6.0)
MR5 454 (17.9) 169 (6.7)
MR6 580 (22.8) 220 (8.7)
MR7 680 (26.8) 286 (11.3)
Table 11: The Dimensions of the Opening for the Flange Mounting, MR4 to MR7, in mm (in inch)
Enclosure size A B E
MR4 315 (12.4) 137 (5.4) 24 (0.9)
MR5 408 (16.1) 152 (6.0) 23 (0.9)
MR6 541 (21.3) 203 (8.0) 23 (0.9)
MR7 655 (25.8) 240 (9.4) 13 (0.5)
Mounting
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711
26 | Danfoss A/S © 2019.05
To Next Page
Loading...
