Danfoss VACON 100 industrial - Page 54

Procedure
1. Find the EMC jumpers that connect the RFI filters to ground.
e30bh297.10
MR4 MR5
e30bh299.10
MR6, 200–500 V
MR6, 600/690 V
2. To disconnect the RFI filters from ground, remove the EMC jumpers. Pull the EMC jumper out with the tool.
e30bh301.10
Electrical Installation
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711
54 | Danfoss A/S © 2019.05