Danfoss VACON 100 industrial - Page 86

OPT
dv
A
e30bg847.10
A The slot coding
Illustration 42: Label on the Option Board
Installation Procedure
1. To get access to the option slots, open the cover of the control unit.
e30bg848.10
2. Install the option board into the correct slot: C, D, or E.
The option board has a slot coding, because of which it is not possible to install the option board in an incorrect slot.
B
A
e30bg849.10
A The slot coding B The option slots
Illustration 43: Installing the Option Boards
3. Close the cover of the control unit.
Control Unit
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711
86 | Danfoss A/S © 2019.05