Danfoss VLT 2800 Design Guide

5.1.21 EMC Immunity 134
5.1.22 Harmonic Current Emission 135
5.1.23 Aggressive Environments 135
5.2 Display and Messages
136
5.2.1 Display Readout 136
5.2.2 Warnings and Alarm Messages 136
5.2.3 Warning Words, Extended Status Words and Alarm Words 140
5.3 General Technical Data
141
5.4 Mains Supply
146
5.4.1 Mains Supply 1x220-240 V/3x200-240 V 146
5.4.2 Mains Supply 3x380-480 V 147
5.5 Parameter List with Factory Settings
148
Index
155
Contents Design Guide
MG27E402 Danfoss A/S © Rev. May/2014 All rights reserved. 5

Danfoss VLT 2800 Specifications

General

Frequency	50/60 Hz
Enclosure	IP20
Input Voltage	200-240V AC
Output Power Range	0.37-2.2kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication Interface	RS485
Operating Temperature	-10°C to +40°C
Storage Temperature	-25°C to +65 °C
Relative Humidity	5 - 95% RH, non-condensing
Output Voltage	0 - 100% of supply voltage