5.3 Local Control Panel Operation
23
5.3.1 Local Control Panel 23
5.3.2 LCP Layout 24
5.3.3 Parameter Settings 25
5.3.4 Uploading/Downloading Data to/from the LCP 25
5.3.5 Changing Parameter Settings 25
5.3.6 Restoring Default Settings 26
5.4 Basic Programming
26
5.4.1 Commissioning with SmartStart 26
5.4.2 Commissioning via [Main Menu] 27
5.4.3 Asynchronous Motor Set-up 27
5.4.4 PM Motor Set-up 28
5.4.5 SynRM Motor Set-up with VVC
+
29
5.4.6 Automatic Motor Adaptation (AMA) 30
5.5 Checking Motor Rotation
31
5.6 Checking Encoder Rotation
31
5.7 Local Control Test
31
5.8 System Start-up
31
6 Application Set-up Examples
32
7 Maintenance, Diagnostics and Troubleshooting
38
7.1 Maintenance and Service
38
7.2 Status Messages
38
7.3 Warning and Alarm Types
40
7.4 List of Warnings and Alarms
41
7.5 Troubleshooting
50
8 Specifications
52
8.1 Electrical Data
52
8.1.1 Line Power Supply 200–240 V 52
8.1.2 Line Power Supply 380–500 V 55
8.1.3 Line Power Supply 525–600 V (FC 302 only) 58
8.1.4 Line Power Supply 525–690 V (FC 302 only) 61
8.2 Line Power Supply
64
8.3 Motor Output and Motor Data
64
8.4 Ambient Conditions
65
8.5 Cable Specifications
65
8.6 Control Input/Output and Control Data
66
Contents Instruction Manual
Danfoss A/S © Rev. 09/2014 All rights reserved. MG33AP22
To Next Page
Loading...
Need help?
General